Cirrus DESIGN SR22T - Maximum Power Fuel Flow

Cirrus Design Section 4
SR22T Normal Procedures
P/N 13772-003 4-15
Maximum Power Fuel Flow
For maximum power operations (Power Lever full forward - 2500 RPM,
36.0 in.Hg manifold pressure) fuel flow should be in the green arc.
For any power setting greater than 30.5 in.Hg (cruise power) fuel flow
is indicated by a dynamically calculated green arc displayed on the
fuel gage. Fuel flow should be maintained within this arc by use of the
mixture lever.
Original Issue