Cirrus DESIGN SR22T User Manual

Cirrus Design Section 7
SR22T Airplane and Systems Description
P/N 13772-003 7-65
Temperature Selection
The temperature selector is electrically linked to the hot and cold air
valves. Rotating the selector simultaneously opens and closes the two
valves, permitting hot and cold air to mix and enter the distribution
system. Rotating the selector clockwise, permits warmer air to enter
the system - counterclockwise, cooler air.
On airplane with the optional Air Conditioning System installed, when
the air conditioning button (snowflake) is pushed, the valve on the
firewall completely closes and the air-conditioner is activated. When
recirculation button is pushed, the fresh air valve completely closes
and cabin air is recirculated to provide for maximum air conditioning
operation. When the air conditioning system is on and the temperature
selector is rotated to the full cool position, recirculating mode can be
activated to provide maximum cabin cooling. Air conditioning or
recirculating mode is not available when the airflow fan selector is in
the “0” position. Recirculating mode is not available unless the air
conditioning system is operating.
Revision 1

Cirrus DESIGN SR22T Specifications

General

Manufacturer	Cirrus Aircraft
Model	SR22T
Seating Capacity	5
Engine	Continental TSIO-550-K
Horsepower	315 hp
Avionics	Cirrus Perspective+ by Garmin
Type	Single-engine piston aircraft
Maximum Speed	213 knots
Cruise Speed	183 knots
Service Ceiling	25, 000 feet
Maximum Takeoff Weight	3, 600 lbs
Wingspan	38 feet 4 inches
Length	26 ft
Height	8 feet 11 inches
Safety Features	Cirrus Airframe Parachute System (CAPS)
Cabin Width	49 inches
Cabin Height	50 inches