Cirrus DESIGN SR22T User Manual

Cirrus Design Section 10
SR22T Safety Information
P/N 13772-003 10-3
Introduction
This aircraft is designed to operate safely and efficiently in a flight
environment. However, like any other aircraft, pilots must maintain
proficiency to achieve maximum safety, utility, and economy.
As the pilot you must be thoroughly familiar with the contents of this
Handbook, the Handbook Supplements, Flight Checklist, and
operational guides and data provided by manufacturers of equipment
installed in this airplane. You must operate the airplane in accordance
with the applicable FAA operating rules and within the Limitations
specified in Section 2 of this Handbook.
The Normal Procedures section of this handbook was designed to
provide guidance for day-to-day operation of this airplane. The
procedures given are the result of flight testing, FAA certification
requirements, and input from pilots with a variety of operational
experience. Become fully familiar with the procedures, perform all the
required checks, and operate the airplane within the limitations and as
outlined in the procedures.
Original Issue

Cirrus DESIGN SR22T Specifications

General

Manufacturer	Cirrus Aircraft
Model	SR22T
Seating Capacity	5
Engine	Continental TSIO-550-K
Horsepower	315 hp
Avionics	Cirrus Perspective+ by Garmin
Type	Single-engine piston aircraft
Maximum Speed	213 knots
Cruise Speed	183 knots
Service Ceiling	25, 000 feet
Maximum Takeoff Weight	3, 600 lbs
Wingspan	38 feet 4 inches
Length	26 ft
Height	8 feet 11 inches
Safety Features	Cirrus Airframe Parachute System (CAPS)
Cabin Width	49 inches
Cabin Height	50 inches