EasyManua.ls Logo

Cirrus DESIGN SR22T - Oxygen System Emergencies; Oxygen System Fault - above 10,000 Ft

Cirrus DESIGN SR22T
512 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-34 P/N 13772-003
Section 3 Cirrus Design
Emergency Procedures SR22T
Oxygen System Emergencies
Oxygen System Fault - Above 10,000 Ft
OXYGEN FAULT Warning
1.
Oxygen Flow Rate.............................................................. CHECK
If no flow:
2.
Initiate Emergency Descent to below 10,000 ft:
a. Power Lever...................................................................... IDLE
b. Mixture............................................................. AS REQUIRED
c. Airspeed ......................................................... VNE (200 KIAS)
If flow is normal:
3. Oxygen Flow Rate.......................................................... MONITOR
4. Initiate Normal Descent as soon as practical
Below 10,000 ft
5. Oxygen System........................................................................OFF
6. Flight ............................................................................ CONTINUE
Remain below altitudes requiring supplemental oxygen.
Amplification
Annunciation indicates tank solenoid failed (open or closed) or flow
rate is low. If flow is checked and confirmed present, solenoid has
failed OPEN; system will continue to provide oxygen until depleted, but
unnecessary flight at altitudes requiring oxygen is not recommended.
OXYGEN FAULT
Original Issue

Table of Contents

Related product manuals