Cisco 301 User Manual

Installing Your Phone
(Optional) Mounting Your Cisco SPA 30X Phone to the Wall
Cisco Small Business IP Phone SPA 30X User Guide (SIP) 30
2
Reversing the Handset Retention Tab
If you mount the phone to a vertical surface, you must reverse the handset
retention tab on the phone body so that the handset does not fall off the phone
when it is placed on the cradle.
Figure 5 Handset Retention Tab (Default Position)
STEP 1 Insert a coin or object of similar width into the slot.
STEP 2 Rotate the tab180°. (See Figure 6.) The tab now catches the slot in the handset
when the handset is placed onto the cradle.

Cisco 301 Specifications

General

Power over Ethernet (PoE)	Yes
Speakerphone	Yes
Headset Port	Yes
Display	Monochrome
Power Source	PoE
Supported Protocols	SIP
Mounting	Desk or wall