Using Advanced Phone Features
Using the Paging Feature
Cisco Small Business IP Phone SPA 30X User Guide (SIP) 62
4
STEP 3 For a new speed dial, scroll to select an unused speed dial (marked with Not
Assigned). To edit a previously existing speed dial, select it.
STEP 4 Press the edit softkey.
STEP 5 Enter the number to assign to the speed dial and press the ok softkey
Using Speed Dials
Cisco SPA 301
Press the number on the phone keypad for the speed dial and wait a few seconds.
Cisco SPA 303
To call one of your configured speed dial numbers, do one of the following:
• Open a phone line and press the number on the phone keypad for the speed
dial, then press the dial softkey.
• Press the Setup button, scroll to Speed Dial and press the select softkey,
choose the number, and press the dial softkey.
• Press the unused line button you have configured for a speed dial.
Using the Paging Feature
Your IP phone can automatically answer pages from other Cisco IP phones in the
office, if your phone administrator has enabled this feature. When your phone is
paged, the phone emits a series of beeps, and a two-way audio is established
between your phone and the phone that called you. You do not have to accept the
page.
Paging Another Phone
To page another phone, dial *96 plus the extension of the phone you are paging. If
the phone you are paging is not set up to auto answer pages, the call will ring as a
normal voice call.
To Next Page
Loading...
Need help?
General
