Using the Web Interface
Changing the LCD Contrast (Cisco SPA 303)
Cisco Small Business IP Phone SPA 30X User Guide (SIP) 80
5
• Deep Bass—Enable to enhance low frequency audio.
STEP 3 Click Submit All Changes.
Changing the LCD Contrast (Cisco SPA 303)
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the User tab.
STEP 3 Under LCD, you can adjust the LCD contrast by entering a number between 1 and
10, with 1 being low contrast.
STEP 4 Click Submit All Changes.
Configuring the Phone Screen Saver (Cisco SPA 303)
To configure the phone screen saver:
STEP 1 Log in to the web interface.
STEP 2 In the Voice tab, click the Phone tab.
Under General, you can configure the following:
• Screen Saver Enable: Turns the screen saver on and off.
• Screen Saver Wait: The number of minutes that the phone is idle before the
screen saver starts.
• Screen Saver Icon: The display type:
- A background picture.
- The station time in the middle of the screen.
- A moving padlock icon. When the phone is locked, the status line
displays a scrolling message “Press any key to unlock your phone.”
To Next Page
Loading...
Need help?
General
