Using Advanced Phone Features
Using Star Codes
Cisco Small Business IP Phone SPA 30X User Guide (SIP) 67
4
STEP 1 Press the Setup button.
STEP 2 Scroll to Time/Date and press the select softkey.
STEP 3 Enter the date in the following format: mm*dd*yy (this will display as m/d).
STEP 4 Enter the time in the following format: hh*mm*ss (this will display as (h:mm).
STEP 5 If the time does not display a.m. (a) or p.m. (p) correctly, adjust with Offset. To
change from a.m. to p.m., enter *12*00*00, to change from p.m. to a.m., enter
#12*00*00.
STEP 6 Press the save softkey.
You can set just one of these choices, if necessary.
Using Star Codes
Your IP phone can support numerous “star codes” to access phone
supplementary services. These codes, which start with *, are entered before
dialing a telephone number and provide services. For example, to block caller ID
(star code 67), you would dial *67, followed by the telephone number you are
calling. Following is a list of commonly-used star codes.
NOTE Some star codes may not be available to you; consult your phone administrator for
more information.
To Next Page
Loading...
Need help?
General
