Cisco 3905 Administration Guide

Preface
•
Overview, page xi
•
Audience, page xi
•
Organization, page xi
•
Related documentation, page xii
•
Documentation, support, and security guidelines, page xiii
•
Guide conventions, page xiii
Overview
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 9.0 (SIP)
provides the information you need to understand, install, configure, manage, and troubleshoot the phones on
a Voice-over-IP (VoIP) network.
Because of the complexity of an IP telephony network, this guide does not provide complete and detailed
information for procedures that you need to perform in Cisco Unified Communications Manager or other
network devices. See the Related documentation, on page xii.
Audience
Network engineers, system administrators, and telecom engineers should review this guide to learn the steps
that are required to set up Cisco Unified IP Phones. The tasks described in this document involve configuring
network settings that are not intended for phone users. The tasks in this manual require a familiarity with
Cisco Unified Communications Manager.
Organization
This manual is organized as follows:
DescriptionChapter
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
xi

Cisco 3905 Specifications

General

Speakerphone	Yes
Ethernet Switch	No
Handset	Standard
Protocol Support	SIP
Lines	1
Headset Port	No
Power over Ethernet (PoE)	IEEE 802.3af Class 1
Ethernet Ports	2