Cisco 3905 Administration Guide

Configuration referenceDescriptionFeature
The service parameter, Advance Adhoc
Conference, (disabled by default in
Cisco Unified Communications
Manager Administration) allows you
to enable these features.
For information on conferences, see the
Cisco Unified Communications
Manager System Guide, “Conference
Bridges” chapter.
For more information, see the Cisco
Unified Communications Manager
System Guide, “Cisco Unified IP Phone”
chapter.
Be sure to inform your users
whether these features are
activated.
Note
•
Allows a user to talk
simultaneously with multiple
parties by calling each
participant individually.
•
Allows a non-initiator in a
standard (ad hoc) conference
to add participants; also allows
any conference participant to
join together two standard
conferences on the same line.
Conference
For more information, see the Cisco
Unified Communications Manager
Features and Services Guide, “Client
Matter Codes” and “Forced
Authorization Codes” chapters.
Controls the types of calls that
certain users can place.
Forced Authorization Codes
(FAC)
For more information, see the Cisco
Unified Communications Manager
Features and Services Guide, “Call
Pickup” chapter.
Allows a user to answer a call that
is ringing on a directory number in
another group.
Group Call Pickup
No configuration required unless you
want to use music on hold. See
“Music-On-Hold” in this table for
information.
Allows the user to move a connected
call from an active state to a held
state by using the Hold/Resume
button. The user resumes a held call
by pressing the Hold/Resume button,
speaker button, or going off-hook.
Hold/Resume
For more information, see Cisco
Unified Communications Manager
Administration Guide, “Cisco Unified
IP Phone Configuration” chapter.
Controls the length of time before
the hookflash indicates a timeout (or
call disconnect).
Hookflash Timer
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
50
Features, Templates, Services, and Users
Available telephony features

Cisco 3905 Specifications

General

Speakerphone	Yes
Ethernet Switch	No
Handset	Standard
Protocol Support	SIP
Lines	1
Headset Port	No
Power over Ethernet (PoE)	IEEE 802.3af Class 1
Ethernet Ports	2