Configuration referenceDescriptionFeature
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Message Waiting Configuration”
chapter
•
Cisco Unified Communications
Manager System Guide, “Voice
Mail Connectivity to Cisco
Unified Communications
Manager” chapter.
Defines directory numbers for
message-waiting on and
message-waiting off indicator. A
directly connected voice-messaging
system uses the specified directory
number to set or to clear a
message-waiting indication for a
particular Cisco Unified IP Phone.
Message Waiting
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Message Waiting Configuration”
chapter
•
Cisco Unified Communications
Manager System Guide, “Voice
Mail Connectivity to Cisco
Unified Communications
Manager” chapter
A light on the phone that indicates
that a user has one or more new
voice messages.
Message Waiting Indicator
For more information, see the Cisco
Unified Communications Manager
Features and Services Guide, “Music
On Hold” chapter.
Plays music while callers are on
hold.
Music On Hold
No configuration required.Mutes the microphone from the
handset or speakerphone.
Mute
For more information, see the Cisco
Unified Communications Manager
System Guide, “Cisco Unified IP
Phones” chapter.
Allows a user to press the Transfer
button and then go on-hook to
complete a call transfer.
On-hook Call Transfer
Requires no configuration.Allows the user to dial E.164
numbers prefixed with a + sign.
To dial the + sign, the user needs to
press and hold the * key for at least
1 second. This applies to dialing the
first digit for both on-hook or
off-hook calls.
Plus Dialing
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
51
Features, Templates, Services, and Users
Available telephony features
To Next Page
Loading...
Need help?
General
