Configuration referenceDescriptionFeature
For more information, see the Cisco
Unified Communications Manager
Administration Guide, “Directory
Number Configuration” chapter.
The Cisco Unified Communications
Manager administrator can configure
a phone number that the Cisco
Unified IP Phone dials as soon as
the handset goes off-hook. This can
be useful for phones that are
designated for calling emergency or
hotline numbers.
Private Line Automated
Ringdown (PLAR)
No configuration required.Allows users to call the most
recently dialed phone number by
pressing the Redial button.
Redial
For more information, see the Cisco
Unified Communications Manager
System Guide, “Understanding
Directory Numbers” chapter.
Allows a user to have multiple
phones that share the same phone
number or allows a user to share a
phone number with a coworker.
Shared Line
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“ Cisco Unified IP Phone
Configuration” chapter
•
Cisco Unified Communications
Manager Administration Guide,
“SIP Profile Configuration
Settings” chapter
You can use Telnet to connect to
your Cisco Unified IP Phone for use
in troubleshooting and phone
maintenance.
Telnet
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Time Period Configuration”
chapter
•
Cisco Unified Communications
Manager System Guide,
“Time-of-Day Routing” chapter
Restricts access to specified
telephony features by time period.
Time-of-Day Routing
For more information, see the Cisco
Unified Communications Manager
Administration Guide, “Time Group
Configuration” chapter.
Updates the Cisco Unified IP Phone
with time zone changes.
Time Zone Update
No configuration required.Allows users to redirect connected
calls from their phones to another
number.
Transfer
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
52
Features, Templates, Services, and Users
Available telephony features
To Next Page
Loading...
Need help?
General
