Cisco 7925G Deployment Guide

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
11
Note: The Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G are currently supported with the Cisco AP3600
when the internal 802.11abgn radio is utilized, however are not currently supported in conjunction with the 802.11ac module
(AIR-RM3000AC) for the Cisco AP3600.
The table below lists the modes that are supported by each Cisco Access Point.
Cisco AP Series
802.11a
802.11b
802.11g
802.11n
Unified
Autonomous
500
No
Yes
Yes
No
Yes
Yes
600
Yes
Yes
Yes
Yes
Yes
No
1040
Yes
Yes
Yes
Yes
Yes
Yes
1100
No
Yes
Optional
No
Yes
Yes
1130 AG
Yes
Yes
Yes
No
Yes
Yes
1140
Yes
Yes
Yes
Yes
Yes
Yes
1200
Optional
Yes
Optional
No
Yes
Yes
1230 AG
Yes
Yes
Yes
No
Yes
Yes

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g