Cisco 7925G Deployment Guide

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
123
1. Connect the power supply to the Cisco Unified Wireless IP Phone 7925G Desktop Charger.
2. Insert the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G into the desktop charger.
3. Power on the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G.
4. Press and hold the Control button on the right side of the desktop charger for 5 seconds.
The Power/Bluetooth status LED begins to flash, which indicates that the desktop charger is now in pairing mode.
5. From the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G, choose Settings > Phone Settings >
Bluetooth.
6. If Bluetooth is Disabled, press Select, select Enable, and then press Save.
7. Select Device List, then press Scan, which will then list the available devices. To rescan, press Rescan.
8. Select Cisco Dock 7900 and press Pair.
9. If prompted, enter 0000 for the passkey and press Select or choose Options > OK, and the pairing will be completed.
10. Press the End button on the phone to return to the main screen.
If paired successfully, then the Power/Bluetooth status LED will turn to solid blue.
Docking
After inserting the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G into the Cisco Unified Wireless IP
Phone7925G Desktop Charger, the Power/Bluetooth status LED will being to flash blue to indicate a Bluetooth connection
attempt is being made.
After the Bluetooth connection is established, the Power/Bluetooth status LED will turn to solid blue.
If currently on a call when the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G is docked, there will be a small
delay to switch the audio path to the desktop charger’s Bluetooth speakerphone while the Bluetooth connection completes. The
call will continue using the Cisco Unified Wireless IP Phone 7925G Desktop Charger’s Bluetooth speakerphone after the
Bluetooth connection is made.
When the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G is undocked, the Bluetooth connection will be
disconnected and the phone will return to the previously used audio path (e.g. handset or speakerphone mode).
See the following links for more information on the Cisco Unified Wireless IP Phone 7925G Desktop Charger.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g_7925gEX_7926/8_0_1/english/user_guide/P256_BK_EBE22
FA_00_wireless-ip-phones-user-guide_chapter_01001.html
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g_7925gEX_7926/8_0/english/quick_start/7925Ch_qs.pdf

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g