Cisco 792xG Site Survey
The Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G has a Site Survey application, which is an offline mode
that gathers information about the access points for the configured network profile and generates and HTML report after exiting
the application.
To access the Site Survey application, navigate to Settings > Status > Site Survey.
To view the HTML report, select System > Site Survey from the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and
7926G webpage.
This information can be utilized to confirm access point configuration as well as coverage.
The neighbor table shows access points (along the column) that are neighbors of the access points with the strongest signal
listed in the row. The percentage of time that the access point had the highest RSSI is displayed as well as the RSSI range for
that access point when it was observed. The access point name is hyperlinked to the access point detail listed below.
To Next Page
Loading...
