EasyManuals Logo

Cisco 7925G Deployment Guide

Cisco 7925G
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
52
G.722 Advertisement
Cisco Unified Communications Manager versions 5.0 and later support the ability to configure whether G.722 is to be a
supported codec system wide or not.
Earlier versions of Cisco Unified Communications Manager do not have this capability, where a Cisco Unified Wireless IP
Phone 7925G, 7925G-EX, and 7926G will attempt to use G.722 assuming the other endpoint also advertises G.722 capabilities.
If using a version of Cisco Unified Communications Manager prior to 5.0 and want to disable G.722 capabilities, then the latest
device package will need to be applied to the Cisco Unified Communications Manager to enable this product specific
configuration option where Advertise G.722 Codec can be disabled for each Cisco Unified Wireless IP Phone 7925G, 7925G-
EX, and 7926G.
For more information, refer to the Cisco Unified Communications Manager documentation.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
Common Settings
Some settings such as Bluetooth can be configured on an enterprise phone, common phone profile or individual phone level.
Override common settings can be enabled at either configuration level.
Audio Bit Rates
The audio bit rate can be configured by creating or editing existing Regions in the Cisco Unified Communications Manager.
It is recommended to select G.722 or G.711 for the audio codec.

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals