EasyManuals Logo

Cisco 7925G Deployment Guide

Cisco 7925G
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #140 background imageLoading...
Page #140 background image
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
140
Call Control Cisco Unified Communications Manager messaging (SCCP)
Network Services DHCP, TFTP, CDP, WWW, Syslog
Security Subsystem Application level security
User Interface Keypad, softkeys, MMI
Audio System RTP, SRTP, RTCP, DSP
System Event Manager
Java Java MIDP
Bluetooth Bluetooth
Trace Levels
Various levels of tracing are available, that can provide different levels of messaging.
Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug
Note: All trace modules are set to Error level by default.
Voice quality can potentially be impacted if higher trace levels are configured or if Preserve Logs is enabled, which will write
the logs to flash memory.
The trace level will reset to Error level by default unless configured to preserve the trace levels where Reset Trace Settings
upon Reboot is set to No.
Trace Logs
To download the phone logs, browse to the web interface (http://x.x.x.x) of the Cisco Unified Wireless IP Phone 7925G,
7925G-EX, or 7926G then select Trace Logs.

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals