Cisco 7925G Deployment Guide

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
124
Using Phone Designer
The Phone Designer application allows the ability to have a customer wallpaper and ringtone for each phone.
The Cisco Unified Wireless IP Phone 7925G and 7925G-EX is supported in Phone Designer version 7.1(3) and later.
Personalization must also be enabled in the Cisco Unified Communications Manager either in Enterprise Parameters, Common
Phone Profile or on a per phone level.
After installing the phone designer, a username and password as well as the IP address of the Cisco Unified Communications
Manager must be configured.
The user account must be created in the Cisco Unified Communications Manager and associated to the corresponding phone.
In order to configure the wallpaper, either select a pre-defined wallpaper or import a wallpaper from the local computer by
selecting Import.
To display the wallpaper on the phone, select Preview on Phone.
To activate and save the wallpaper to the phone flash, select Save to Phone.
The default background image can be restored by navigating to Settings > Phone Settings > Customize Home Page >
Background Image.
In order to configure the ringtone, either select a pre-defined ringtone or import a ringtone from the local computer by selecting
Import.
To hear the ringtone on the phone, select Preview on Phone.
To activate and save the ringtone to the phone flash, select Save to Phone.

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g