Cisco 7925G - Models

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
13
Models
There are four Cisco Unified Wireless IP Phone 7925G models, one Cisco Unified Wireless IP Phone 7925G-EX model, and
one Cisco Unified Wireless IP Phone 7926G model.
The Cisco Unified Wireless IP Phone 7925G and 7926G models are grey in color, where the Cisco Unified Wireless IP Phone
7925G-EX is yellow in color.
The regulatory domain can be identified by navigating to Settings > Model Information > WLAN Regulatory Domain and
then referencing the Regulatory Domain number in the table below.
The Cisco Unified Wireless IP Phone 7925G-EX, and Cisco Unified Wireless IP Phone 7926G are configured like the Cisco
Unified Wireless IP Phone 7925G –W model, which requires an 802.11d enabled access point.
Use the following tables to identify specific phone versions that support these regulatory domains for use around the world:
7925G
Part Number
Regulatory
Domain
Regulatory
Domain
Number
Frequency Range
Available
Channels
Channel Set
CP-7925G-A-K9
FCC
(Americas)
1050
2.412 – 2.462 GHz
5.180 – 5.240 GHz
5.260 – 5.320 GHz
5.500 – 5.700 GHz
5.745 – 5.805 GHz
11
4
4
8
4
1-11
36,40,44,48
52,56,60,64
100-140
149,153,157,161
CP-7925G-E-K9
ETSI
(Europe)
3051
2.412 – 2.472 GHz
5.180 – 5.700 GHz
13
16
1-13
36-48,52-64,100-140
CP-7925G-P-K9
Japan
4157
2.412 – 2.472 GHz
2.412 – 2.484 GHz
5.180 – 5.700 GHz
13 (802.11g)
14 (802.11b)
16
1-13
1-14
36-48,52-64,100-140
CP-7925G-W-K9
Rest of
World
5252
Uses 802.11d to identify available channels and transmit
powers. Channels operating at 2.412 GHz - 2.484 GHz and
5.180 GHz - 5.805 GHz are supported.
7925G-EX
Part Number
Regulatory
Domain
Number
Frequency Range
Available
Channels
Channel Set
CP-7925G-EX-K9
5252
2.412 – 2.484 GHz
5.180 – 5.240 GHz
5.260 – 5.320 GHz
5.500 – 5.700 GHz
5.745 – 5.805 GHz
14
4
4
11
4
1-14
36,40,44,48
52,56,60,64
100-140
149,153,157,161