Use the following information to configure the audio bit rate to be used for voice calls.
Product Specific Configuration Options
In Cisco Unified Communications Manager Administration, the following Cisco Unified Wireless IP Phone 7925G, 7925G-EX,
and 7926G configuration options are available.
For a description of these options, click the ? on the configuration page.
Product specific configuration options can be configured in bulk via the Bulk Admin Tool if using Cisco Unified
Communications Manager 5.0 and later. If using a prior version, then must be configured separately.
As of the 1.4(1) release Multiple Level Vendor Configuration is allowed to override common settings.
Some of the product specific configuration options can be configured on an enterprise phone, common phone profile or
individual phone configuration level.
To Next Page
Loading...
