Cisco 7925G - Battery LED; Battery LED Unlit; Battery LED Is Red; Battery LED Is Amber-Yellow

Cause
The Cisco Unified Wireless IP Phone 7925G Desktop Charger is entering or leaving Bluetooth pairing mode.
Solution
This is a normal action.
Battery LED
This section describes situations that are identified by the Battery LED. When the Battery LED lights green,
the spare battery is fully charged.
Battery LED Unlit
Problem
The Battery LED is unlit.
Cause
No spare battery is installed in the Cisco Unified Wireless IP Phone 7925G Desktop Charger, or battery is
not making contact correctly.
Solution
If a battery is not installed, this situation is normal. If a battery is installed, remove the battery and place it
back into the charger. Also, check that the Power/Bluetooth Status LED lights green.
Battery LED is red
Problem
The Battery LED is red.
Cause
The spare battery is charging.
Solution
This situation is normal.
Battery LED Is amber-yellow
Problem
The Battery LED is amber-yellow.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
145
Troubleshooting
Battery LED