Turn On DND
Procedure
Step 1
To turn on DND, perform one of the following:
•
Choose Options > DND.
•
Press , and select the DND radio button to turn DND on ( ).
Do Not Disturb is active appears on the phone and the ringtone is turned off.
Step 2
To turn off DND, perform one of the following:
•
Choose Options > DND.
•
Press , and select the DND radio button to turn DND off ( ).
Customize DND Settings
If your system administrator configured DND settings to appear on the User Options page, follow these steps
to customize your settings.
Procedure
Step 1
Log in to your User Options web pages.
Step 2
From the drop-down menu, choose User Options > Device.
Step 3
Set the following options:
Do Not Disturb
Set to enable or disable DND.
DND Option
Choose either Call Reject (to turn off all audible and visual notifications) or Ringer Off (to turn off
only the ringer).
DND Incoming Call Alert
(applies to either DND option set): Set the alert to beep only, flash only, disable the alert, or choose
None to use the alert setting that your system administrator configured.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
48
Calling Features
Turn On DND