Cisco 7925G User Manual

Related Topics
Fast Dial, on page 57
Call Answering
You can answer a call by using several options, if they are available on your phone.
Tips
•
To use any button to answer a call, see Keypad Settings, on page 100.
•
You can answer an incoming call even when the keypad is locked.
•
If you were using an application or service before you answered an incoming call, your application or
service resumes after you end the call.
•
To switch from connected call to answer a ringing call (using the Bluetooth wireless headset), see the
instructions from your Bluetooth wireless headset documentation.
•
To send a call directly to voicemail (using the Bluetooth wireless headset), use the Call Reject feature
on your Bluetooth wireless headset (exact feature name may vary). For more information, see your
Bluetooth wireless headset documentation. If your system administrator has not configured iDivert for
your phone, the phone ignores the call reject request.
Related Topics
Multiple Calls, on page 43
Voice messages, on page 87
Call Park, on page 60
Suspicious Call Trace, on page 67
Call PickUp, on page 59
Answer Call
Procedure
Press .
Related Topics
Any Key Answer, on page 100
Silence Incoming Call Ring
You can stop an incoming call from ringing, and force it to forward to another phone number. The phone
number that receives the call is the number set up as your no answer target number. This number can be your
voicemail number or to another user's phone.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide
38
Calling Features
Call Answering

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g