Cisco Catalyst 2960-XR Configuration Guides

IGMP Versions 15
IGMP Version 1 15
IGMP Version 2 15
Default IGMP Configuration 15
Configuring Optional IGMP Features 16
Configuring the Switch as a Member of a Group 16
Controlling Access to IP Multicast Group 17
Changing the IGMP Version 19
Modifying the IGMP Host-Query Message Interval 20
Changing the IGMP Query Timeout for IGMPv2 22
Changing the Maximum Query Response Time for IGMPv2 23
Configuring the Switch as a Statically Connected Member 25
Configuration Examples for IGMP Features 26
Example: Configuring the Switch as a Member of a Multicast Group 26
Example: Controlling Access to IP Multicast Groups 27
Where to Go Next 27
Additional References 27
CHAPTER 3 Configuring CGMP 29
Finding Feature Information 29
Prerequisites for Configuring CGMP 29
Restrictions for CGMP 30
Information About CGMP 30
Enabling CGMP Server Support 30
Monitoring CGMP 32
Where to Go Next 33
Additional References 33
Feature History and Information for CGMP 34
CHAPTER 4 Configuring PIM 35
Finding Feature Information 35
Prerequisites for Configuring PIM 35
Prerequisites for Configuring PIM Stub Routing 35
Restrictions for PIM 36
Restrictions for Configuring Auto-RP and BSR 36
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
iv OL-29426-01
Contents

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C