Cisco Catalyst 2960-XR Configuration Guides

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Switch(config-igmp-profile)# end
Step 6
Verifies your entries.
show ip igmp interface [interface-id]
Example:
Switch# show ip igmp interface
Step 7
Related Topics
Example: Controlling Access to IP Multicast Groups, on page 27
Changing the IGMP Version
By default, the switch uses IGMP Version 2, which provides features such as the IGMP query timeout and
the maximum query response time.
All systems on the subnet must support the same version. The switch does not automatically detect Version
1 systems and switch to Version 1. You can mix Version 1 and Version 2 hosts on the subnet because Version
2 routers or switches always work correctly with IGMPv1 hosts.
Configure the switch for Version 1 if your hosts do not support Version 2.
This procedure is optional.
SUMMARY STEPS
1.
configure terminal
2.
interface interface-id
3.
ip igmp version {1 | 2 | 3 }
4.
end
5.
show ip igmp interface [interface-id]
6.
copy running-config startup-config
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29426-01 19
Understanding Cisco's Implementation of IP Multicast Routing
Changing the IGMP Version

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C