Cisco Catalyst 9400 User Manual

PurposeCommand or Action
Shows currently configured license information
and the licence that is applicable after reload.
show version
Example:
Step 6
Device# show version
<output truncated>
Technology Package License Information:
------------------------------------------------------------------------------
Technology-package
Technology-package
Current Type
Next reboot
------------------------------------------------------------------------------
network-advantage Smart License
network-advantage
Subscription Smart
License dna-advantage
<output truncated>
Reloads the device.reload
Example:
Step 7
Device# reload
What to do next
After you configure a license level, the change is effective after a reload. To know if reporting is required,
refer to the output of the show license status privileged EXEC command and check the Next ACK deadline:
and Next report push: fields.
The change in license usage is recorded on the product instance. The next steps relating to reporting - if
required - depend on your current topology.
Note
• Connected to CSSM Through CSLU
• Product Instance-initiated communication: The product instance triggers reporting and installs the
returning ACK. CSLU sends the RUM report to CSSM and collects the ACK from CSSM.
• CSLU-initiated communication: You have to collect usage from the CSLU interface. CSLU sends
the RUM report to CSSM and collects the ACK from CSSM.
• Connected Directly to CSSM: The product instance triggers reporting and installs the returning ACK.
• CSLU Disconnected from CSSM
• Product Instance-initiated communication: The product instance triggers reporting. In the CSLU
interface and on the CSSM Web UI you then have to complete these tasks Download All For Cisco
(CSLU Interface), on page 142 > Uploading Usage Data to CSSM and Downloading an ACK, on
page 159 > Upload From Cisco (CSLU Interface), on page 143.
System Management Configuration Guide, Cisco IOS XE Bengaluru 17.4.x (Catalyst 9400 Switches)
165
Smart Licensing Using Policy
Configuring a License

Cisco Catalyst 9400 Specifications

General

Product Series	Catalyst 9400 Series
Layer	Layer 2/3
Operating System	Cisco IOS XE
Switch Type	Modular
Uplink Interfaces	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet
Stacking	No
Form Factor	Modular Chassis
Operating Temperature	0°C to 40°C (32°F to 104°F)
Redundancy	Power supplies
Security Features	MACsec
Management	Cisco DNA Center, CLI, SNMP