Cisco CRS

To Next Page

To Previous Page

Task ID

OperationsTask ID

read, writeaaa

Examples

The following example shows how to set the IP address of the specified interface for all outgoing TACACS+

packets:

RP/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# tacacs source-interface GigabitEthernet 0/0/0/29 vrf abc

Related Commands

DescriptionCommand

Groups different server hosts into distinct lists and

distinct methods.

aaa group server tacacs+, on page 22

Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1

106 OL-24740-01

Authentication, Authorization, and Accounting Commands

tacacs source-interface

Other manuals for Cisco CRS