DescriptionCommand
Specifies the authentication and encryption key that
is used between the router and the RADIUS daemon
running on the RADIUS server.
key (RADIUS), on page 38
Sets the interval for which a router waits for a server
host to reply before timing out.
radius-server timeout , on page 54
Specifies the number of times a RADIUS request is
resent to a server if the server is not responding or is
responding slowly.
retransmit (RADIUS), on page 57
Configures the IP address of the private RADIUS
server for the group server.
server-private (RADIUS), on page 65
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
112 OL-24740-01
Authentication, Authorization, and Accounting Commands
timeout (RADIUS)
To Next Page
Loading...
