Cisco CRS

Task ID
OperationsTask ID
—
none
Examples
In the example, the root location has one certificate, and disk0 has one certificate. The following sample output
is from the show sam certificate command:
RP/0/RP0/CPU0:router# show sam certificate
summary
all
-------------------- SUMMARY OF CERTIFICATES -------------------
Certificate Location :root
Certificate Index :1
Certificate Flag :VALIDATED
Serial Number :32:E0:A3:C6:CA:00:39:8C:4E:AC:22:59:1B:61:03:9F
Subject Name :
cn=Code Signing Server Certificate Authority,o=Cisco,c=US
Issued By :
cn=Code Signing Server Certificate Authority,o=Cisco,c=US
Validity Start :[UTC] Tue Oct 17 01:46:24 2000
Validity End :[UTC] Sat Oct 17 01:51:47 2015
CRL Distribution Point
file://\\CodeSignServer\CertEnroll\Code%20Signing%20Server%20Certificate
%20Authority.crl
Certificate Location :mem
Certificate Index :1
Certificate Flag :VALIDATED
Serial Number :01:27:FE:79:00:00:00:00:00:05
Subject Name :
cn=Engineer code sign certificate
Issued By :
cn=Code Signing Server Certificate Authority,o=Cisco,c=US
Validity Start :[UTC] Tue Oct 9 23:14:28 2001
Validity End :[UTC] Wed Apr 9 23:24:28 2003
CRL Distribution Point
file://\\CodeSignServer\CertEnroll\Code%20Signing%20Server%20Certificate %20Authority.crl
This table describes the significant fields shown in the display.
Table 13: show sam certificate summary all Field Descriptions
DescriptionField
Location of the certificate; one of the following: root,
mem, disk0, or disk1 .
Certificate Location
Index number that the Software Authentication
Manager automatically assigns to the certificate.
Certificate Index
One of the following: TRUSTED, VALIDATED,
EXPIRED, or REVOKED.
Certificate Flag
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 243
Software Authentication Manager Commands
show sam certificate