Cisco CRS

To Next Page

To Previous Page

Examples

The following example shows how to set the IP address of the Management Ethernet interface for all outgoing

SSH connections:

RP/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# ssh client source-interface MgmtEth 0/RP0/CPU0/0

Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1

OL-24740-01 275

Secure Shell Commands

ssh client source-interface

Other manuals for Cisco CRS