Cisco CRS User Manual

Examples
In the following example, the SSH server is brought up to receive connections for VRF “green”:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ssh server vrf green
Related Commands
DescriptionCommand
Displays information about the SSH server.
For more information, see the Cisco IOS XR System
Management Command Reference for the Cisco CRS
Router.
show processes
Forces the SSH server version to be only 2 (SSHv2).ssh server v2, on page 285
SSH server supports setting DSCP value in the
outgoing packets. If not configured, the default DSCP
value set in packets is 16 (for both client and server).
ssh server dscp <value from 0 - 63>
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 279
Secure Shell Commands
ssh server

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs