Examples
The following example shows how to enable command authorization using the method list named listname4
on a line template named configure:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# line template configure
RP/0/RP0/CPU0:router(config-line)# authorization commands listname4
Related Commands
DescriptionCommand
Creates a method list for authorization.aaa authorization , on page 16
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 27
Authentication, Authorization, and Accounting Commands
authorization (line)
To Next Page
Loading...
