Examples
The following example shows how to establish the number of tries for the dead-criteria conditions for a
RADIUS server to be marked as dead for the radius-server dead-criteria tries command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# radius-server dead-criteria tries 4
Related Commands
DescriptionCommand
Defines the length of time in seconds that must elapse
from the time that the router last received a valid
packet from the RADIUS server to the time the server
is marked as dead.
radius-server dead-criteria time, on page 46
Defines the length of time, in minutes, for a RADIUS
server to remain marked dead.
radius-server deadtime , on page 50
Displays information for the dead-server detection
criteria.
show radius dead-criteria, on page 84
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 49
Authentication, Authorization, and Accounting Commands
radius-server dead-criteria tries
To Next Page
Loading...
