Command Default
Details for all user groups, or all local users, or all task groups are listed if no argument is entered.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 2.0
The ikegroup keyword was added.Release 3.4.0
The show task supported command was removed andits topic was
added as a keyword for the show aaa command.
Release 3.5.0
Usage Guidelines
Use the show aaa command to list details for all IKE groups, user groups, local users, AAA task IDs, or task
groups in the system. Use the optional ikegroup-name, usergroup-name, username, or taskgroup-name
argument to display the details for a specified IKE group, user group, user, or task group, respectively.
Task ID
OperationsTask ID
readaaa
Examples
The following sample output is from the show aaa command, using the ikegroup keyword:
RP/0/RP0/CPU0:router# show aaa ikegroup
IKE Group ike-group
Max-Users = 50
IKE Group ikeuser
Group-Key = test-password
Default Domain = cisco.com
IKE Group ike-user
The following sample output is from the show aaa command, using the usergroup command:
RP/0/RP0/CPU0:router# show aaa usergroup operator
User group 'operator'
Inherits from task group 'operator'
User group 'operator' has the following combined set
of task IDs (including all inherited groups):
Task: basic-services : READ WRITE EXECUTE DEBUG
Task: cdp : READ
Task: diag : READ
Task: ext-access : READ EXECUTE
Task: logging : READ
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 71
Authentication, Authorization, and Accounting Commands
show aaa
To Next Page
Loading...
Need help?
General
