Cisco CRS - Page 84

Task: root-lr : READ WRITE EXECUTE DEBUG
Task: root-system : READ WRITE EXECUTE DEBUG
Task: route-map : READ WRITE EXECUTE DEBUG
Task: route-policy : READ WRITE EXECUTE DEBUG
Task: snmp : READ WRITE EXECUTE DEBUG
Task: sonet-sdh : READ WRITE EXECUTE DEBUG
Task: static : READ WRITE EXECUTE DEBUG
Task: sysmgr : READ WRITE EXECUTE DEBUG
Task: system : READ WRITE EXECUTE DEBUG
Task: transport : READ WRITE EXECUTE DEBUG
Task: tty-access : READ WRITE EXECUTE DEBUG
Task: tunnel : READ WRITE EXECUTE DEBUG
Task: universal : READ WRITE EXECUTE DEBUG
Task: vlan : READ WRITE EXECUTE DEBUG
Task: vrrp : READ WRITE EXECUTE DEBUG
The following sample output is from show aaa command with the userdb keyword:
RP/0/RP0/CPU0:router# show aaa userdb
Username lab (admin plane)
User group root-system
User group cisco-support
Username acme
User group root-system
The following sample output is from the show aaa command, using the task supported keywords. Task IDs
are displayed in alphabetic order.
RP/0/RP0/CPU0:router# show aaa task supported
aaa
acl
admin
atm
basic-services
bcdl
bfd
bgp
boot
bundle
cdp
cef
cisco-support
config-mgmt
config-services
crypto
diag
disallowed
drivers
eigrp
ext-access
fabric
fault-mgr
filesystem
firewall
fr
hdlc
host-services
hsrp
interface
inventory
ip-services
ipv4
ipv6
isis
logging
lpts
monitor
mpls-ldp
mpls-static
mpls-te
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
74 OL-24740-01
Authentication, Authorization, and Accounting Commands
show aaa