Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine User Manual

4-6
Installation Guide for Cisco Secure ACS Solution Engine 4.1
OL-9969-03
Chapter 4 Administering Cisco Secure ACS Solution Engine
Basic Command Line Administration Tasks
• CSRadius
• CSTacacs
Tip To list the services and their status, you can use the show command. For more information, see
Determining the Status of Solution Engine System and Services From a Serial Console,
page 4-3.
To start an ACS service:
Step 1 Log in to the ACS SE. For more information, see Logging In to the Solution Engine From a Serial
Console, page 4-2.
Step 2 Type start followed by a single space and the name of the ACS service that you want to start.
Tip You can list more than one service to start; type a single space between each.
Step 3 Press Enter.
Result: The system immediately displays the message:
[service name] is starting. . .
Followed by the message:
[service name] is running
Restarting Solution Engine Services From a Serial Console
Note You typically restart solution engine services in the web interface.
You can restart any ACS SE service from the serial console. ACS SE services include:
• CSAdmin
• CSAgent
• CSAuth
• CSDbSync
• CSLog
• CSMon
• CSRadius
• CSTacacs
Tip To list the services and their status, you can use the show command. For more information, see
Determining the Status of Solution Engine System and Services From a Serial Console,
page 4-3.

Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Specifications

General

Brand	Cisco
Model	CSACSE-1111-K9 - Secure Access Control Server Solution Engine
Category	Software
Language	English