Cisco CSR 1000v Series User Manual

DescriptionProperty
(Cisco IOS XE 3.16S2 and later, and Denali 16.2 and later)
Configures the Resource Template.
Possible values: default, service_plane_medium, service_plane_heavy
Resource Template
Features
Enables the IOS SCP feature.Enable SCP Server
(Enable SSH Login, Cisco IOS XE Release 3.11S)
(Enable SSH Login and Disable Telnet Login, Cisco IOS XE Release
3.12S and later, and Denali 16.2 and later)
Enables remote login using SSH and disables remote login via Telnet.
Requires that the login username and password are set.
Enable SSH Login
Enable SSH Login and Disable Telnet Login
Additional Configuration Properties
Configures the password for privileged (enable) access.Enable Password
Configures the network domain name.Domain Name
(Cisco IOS XE 3.13S and later, and Denali 16.2 and later)
Configures the license technology level that is available when the Cisco
CSR 1000v boots.
License Boot Level
Table 23: OVA Bootstrap Properties for Cisco IOS XE Release 3.9S and 3.10S
DescriptionProperty
Bootstrap Properties
Sets the login username for the router.Login Username
Sets the login password for the router.Login Password
Sets the management gateway address/mask in IPv4 format for the
GigabitEthernet0 management interface.
Management IPv4 Address/Mask
Sets the default management gateway IP address in IPv4 format for
the GigabitEthernet0 management interface.
Management IPv4 Default Gateway
Configures the hostname of the router.Router name
Features
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
80
Installing the Cisco CSR 1000v in VMware ESXi Environments
Deploying the Cisco CSR 1000v OVA to the VM using vSphere

Cisco CSR 1000v Series Specifications

General

Brand	Cisco
Model	CSR 1000v Series
Category	Network Router
Language	English