DescriptionProperty
(Cisco IOS XE Release 3.11S through 3.17S, and Denali 16.2 and
later)
Configures the IPv4 management default gateway address. If using
DHCP, enter “dhcp” in the field.
Management IPv4 Default Gateway
(Cisco IOS XE Release 3.12S through 3.17S, and Denali 16.2 and
later)
Configures the IPv4 management default gateway address. If using
DHCP, enter “dhcp” in the field.
Management IPv4 Gateway
(Cisco IOS XE Release 3.12S through 3.17S, and Denali 16.2 and
later)
Configures the IPv4 Network (such as “192.168.2.0/24” or “192.168.2.0
255.255.255.0”) that the management gateway should route to. If a
default route (0.0.0.0/0) is desired, this may be left blank.
Management IPv4 Network
(Optional) Configures the IP address used for remote management of
the Cisco CSR 1000v by the REST API or by the Cisco Prime Network
Services Controller. The address must be in the same subnet as the
management interface address.
Beginning with Cisco IOS XE 3.13S, this option is not used
if configuring the shared management interface to support
REST API. See Introduction to REST API Configuration
Options, on page 277.
Note
Remote Management IPv4 Address
Configures the IP address of the Cisco Prime Network Services
Controller.
This setting is used if you plan to remotely manage the Cisco CSR
1000v using the Cisco Prime Network Services Controller.
PNSC IPv4 Address
(Optional) Configures the Cisco Prime Network Services Controller
service agent SSL port on the local Cisco CSR 1000v to receive policies
from the service manager.
This setting is used if you plan to remotely manage the Cisco CSR
1000v using the Cisco Prime Network Services Controller.
PNSC Agent Local Port
Configures the Cisco Prime Network Services Controller shared secret
key for the Cisco Prime Network Services Controller agent to set the
SSL certificate from the controller.
This setting is used if you plan to remotely manage the Cisco CSR
1000v using the Cisco Prime Network Services Controller.
PNSC Shared Secret Key
Configures the hostname of the router.Router name
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
79
Installing the Cisco CSR 1000v in VMware ESXi Environments
Deploying the Cisco CSR 1000v OVA to the VM using vSphere