Procedure
Step 1 Select Voice > System.
Step 2 In the System Configuration section, locate the Restricted Access Domains field and enter fully qualified
domain names (FQDNs) for each server. Separate FQDNs with commas.
Example:
voiceip.com, voiceip1.com
You can configure this parameter in the phone configuration XML file (cfg.xml) by entering a string in this
format:
<Restricted_Access_Domains ua="na">voiceip.com, voiceip1.com</Restricted_Access_Domains>
Step 3 Click Submit All Changes.
Configure the DHCP Options
You can set the order in which your phone uses the DHCP options. For help with DHCP Options, see DHCP
Option Support, on page 119.
Before you begin
Access the Phone Web Interface, on page 104.
Procedure
Step 1 Select Voice > Provisioning.
Step 2 In the Configuration Profile section, set the DHCP Option To Use and DHCPv6 Option To Use parameters
as described in the Parameters for DHCP Options Configuration, on page 118 table.
Step 3 Click Submit All Changes.
Parameters for DHCP Options Configuration
The following table defines the function and usage of parameters for DHCP Options Configuration in the
Configuration Profile section under the Voice>Provisioning tab in the phone web interface. It also defines
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
118
Cisco IP Phone Configuration
Configure the DHCP Options
To Next Page
Loading...
Need help?
General