Cisco PenTeleData 8800 Series Guide

DescriptionValueParameter
For executives to deactivate call
filtering
The # or * code that you want to be
used for the function
Exec_Call_Filter_Deact_Code
For assistants to transfer an ongoing
call to an executive
The # or * code that you want to be
used for the function
Exec_Assistant_Call_Push_Code
For executives or assistants to join
an ongoing call
The # or * code that you want to be
used for the function
Exec_Call_Bridge_Code
For executives or assistants to
transfer an ongoing call to
themselves
The # or * code that you want to be
used for the function
Exec_Call_Retrieve_Code
Programmable Softkeys for Executives and Assistants
All of the programmable softkeys for executives and assistants are set up by default.
See Programmable Softkeys, on page 267 for details on programmable softkeys.
Executive-Assistant Programmable Softkeys in the XML Configuration File
The following sample XML Configuration file section shows the parameters (XML tags) and values for the
programmable softkeys for executives and assistants.
<!-- Programmable Softkeys -->
<Programmable_Softkey_Enable ua="na">No</Programmable_Softkey_Enable>
<Idle_Key_List ua="na">em_login;acd_login;acd_logout;astate;avail;unavail;redial;
recents;cfwd;dnd;lcr;pickup;gpickup;unpark;em_logout;guestin;guestout;callretrieve;
bridgein;</Idle_Key_List>
<Hold_Key_List ua="na">resume|1;endcall|2;newcall|3;redial;dir;cfwd;dnd;
callpush;</Hold_Key_List>
<Shared_Active_Key_List ua="na">newcall|1;barge|2;bargesilent|3;cfwd|4;dnd|5;
callretrieve;bridgein</Shared_Active_Key_List>
<Shared_Held_Key_List ua="na">resume|1;barge|2;cfwd|3;dnd|4;</Shared_Held_Key_List>
<Exec_Assistant_Key_List ua="na">proxycall|2;divert|3;</Exec_Assistant_Key_List>
The following table describes these parameters and values.
DescriptionValueParameters
Enables executives to join an
ongoing call
bridgein
Idle_Key_List,
Shared_Active_Key_List
Enables executives to transfer an
ongoing call to themselves
callretrieve
Idle_Key_List,
Shared_Active_Key_List
Enables assistants to transfer an
ongoing call to an executive, after
putting the call on hold
callpushHold_Key_List
Enables assistants to initiate calls
on behalf of executives, from the
Settings > Executive menu
proxycallExec_Assistant_Key_List
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
213
Cisco IP Phone Configuration
Programmable Softkeys for Executives and Assistants

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English