Cisco PenTeleData 8800 Series Guide

Parameters for BroadWorks XSI Call Logs on a Line
The following table defines the function and usage of XSI Call Logs on a Line parameters in the XSI Phone
Service section under the Phone tab in the phone web interface. It also defines the syntax of the string that is
added in the phone configuration file with XML(cfg.xml) code to configure a parameter.
Table 29: Parameters for XSI Call Logs on a Line
DescriptionParameter
Enter the name of the server; for example,
xsi.iop1.broadworks.net
.
XSI Host Server uses http protocol by
default. To enable XSI over HTTPS, you
can specify https:// in the server.
Note
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<XSI_Host_Server
ua="na">https://xsi.iop1.broadworks.net</XSI_Host_Server>
• In the phone web interface, enter the XSI server
to use.
Default: Empty
XSI Host Server
Determines the XSI authentication type. Select Login
Credentials to authenticate access with XSI id and
password. Select SIP Credentials to authenticate
access with the register user ID and password of the
SIP account registered on the phone.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<XSI_Authentication_Type ua="na">SIP
Credentials</XSI_Authentication_Type>
• In the phone web interface, specify the
authentication type for XSI service.
Options: SIP Credentials and Login Credentials
Default: Login Credentials
XSI Authentication Type
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
204
Cisco IP Phone Configuration
Parameters for BroadWorks XSI Call Logs on a Line

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English