Cisco PenTeleData 8800 Series Guide

Allocate a Key Expansion Module Type
You can assign the type of key expansion module that the phone supports:
• BEKEM
• CP-8800-Audio
• CP-8800-Video
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code.
Before you begin
• Access the phone administration web page. See Access the Phone Web Interface, on page 104.
Procedure
Step 1 Select Voice > Att Console.
Step 2 Set the KEM Type from BEKEM, CP-8800-Audio, and CP-8800-Video
You can also configure the parameter in the configuration file (cfg.xml) by entering a string in the following
format:
<KEM_Type ua="na">CP-8800-Video</KEM_Type>
Options: BEKEM, CP-8800-Audio, and CP-8800-Video
Default: CP-8800-Video
Step 3 Press Submit All Changes.
Allocate a Key Expansion Module Type with the Phone Menu
You can assign the type of key expansion module that the phone supports.
Procedure
Step 1 Press Applications .
Step 2 Select User preferences > Attendant console preferences > KEM type.
Step 3 Select the key expansion module type.
Step 4 Press Save.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
487
Cisco IP Phone Accessories
Allocate a Key Expansion Module Type

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English