Cisco PenTeleData 8800 Series Guide

Parameters for Set Up Presence
The following table defines the function and usage of Set Up Presence parameters in theBroadsoft XMPP
section under the Phone tab in the phone web interface. It also defines the syntax of the string that is added
in the phone configuration file with XML(cfg.xml) code to configure a parameter.
Table 51: Parameters for Set Up Presence
DescriptionParameter
Enables the BroadSoft XMPP directory for the phone
user.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<XMPP_Enable ua="na">Yes</XMPP_Enable>
• In the phone web page, select Yes to forward
all calls. Select No to disable it.
Options: Yes and No
Default: No
XMPP Enable
Name of the XMPP server; for example,
xsi.iop1.broadworks.net.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<XMPP_Server ua="na"/>
• In the phone web page, enter a name for the
server.
Default: Blank
Server
Server port for the directory.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<XMPP_Port ua="na">5222</XMPP_Port>
• In the phone web page, enter the server port.
Default: Blank
Port
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
252
Cisco IP Phone Configuration
Parameters for Set Up Presence

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English