Description and Default ValueParameter Name
Result message of resync or upgrade attempt. Only
useful in generating result syslog messages. The value
is preserved in the UPGERR variable in the case of
upgrade attempts.
ERR
The contents of the Line n UserID configuration
parameter.
UIDn
Extension Mobility StatusEMS
Extension Mobility User IDMUID
Extension Mobility PasswordMPWD
Internal Error Codes
The phone defines a number of internal error codes (X00–X99) to facilitate configuration in providing finer
control over the behavior of the unit under certain error conditions.
Description and Default ValueParameter Name
Transport layer (or ICMP) error when sending a SIP
request.
X00
SIP request times out while waiting for a response.X20
General SIP protocol error (for example, unacceptable
codec in SDP in 200 and ACK messages, or times out
while waiting for ACK).
X40
Dialed number invalid according to given dial plan.X60
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
76
Cisco IP Phone Provisioning
Internal Error Codes
To Next Page
Loading...
Need help?
General