Cisco PenTeleData 8800 Series Guide

Description and Default ValueParameter Name
IP address of the phone within its local subnet. For
example 192.168.1.100.
IP
External IP of the phone, as seen on the Internet. For
example 66.43.16.52.
EXTIP
Software version string. For example,
sip88xx.11-0-1MPP.
SWVER
Hardware version string. For example, 2.0.1HWVER
Provisioning State (a numeric string):
-1 = explicit resync request
0 = power-up resync
1 = periodic resync
2 = resync failed, retry attempt
PRVST
Upgrade State (a numeric string):
1 = first upgrade attempt
2 = upgrade failed, retry attempt
UPGST
Result message (ERR) of previous upgrade attempt;
for example http_get failed.
UPGERR
Seconds since last resync attempt.PRVTMR
Seconds since last upgrade attempt.UPGTMR
Seconds since Line 1 lost registration with SIP server.REGTMR1
Seconds since Line 2 lost registration with SIP server.REGTMR2
Legacy macro name.UPGCOND
File access scheme, one of TFTP, HTTP, or HTTPS,
as obtained after parsing resync or upgrade URL.
SCHEME
Request target server host name, as obtained after
parsing resync or upgrade URL.
SERV
Request target server IP address, as obtained after
parsing resync or upgrade URL, possibly following
DNS lookup.
SERVIP
Request target UDP/TCP port, as obtained after
parsing resync or upgrade URL.
PORT
Request target file path, as obtained after parsing
resync or upgrade URL.
PATH
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
75
Cisco IP Phone Provisioning
Macro Expansion Variables

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English