Cisco PenTeleData 8800 Series Guide

You can also configure the parameters in the phone configuration file with XML(cfg.xml) code. To configure
each parameter, see the syntax of the string in the Parameters for TR-069 Configuration, on page 187 table.
As a bidirectional SOAP/HTTP-based protocol, TR-069 provides the communication between CPEs and Auto
Configuration Servers (ACS).
For TR-069 Enhancements, see TR-069 Parameter Comparison, on page 507.
Before you begin
Access the phone administration web page. See Access the Phone Web Interface, on page 104.
Procedure
Step 1 Select Voice > TR-069.
Step 2 Set up the fields as described in Parameters for TR-069 Configuration, on page 187 table.
Step 3 Click Submit All Changes.
View TR-069 Status
When you enable TR-069 on a user phone, you can view status of TR-069 parameters on the phone web
interface.
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code. To configure
each parameter, see the syntax of the string in the Parameters for TR-069 Configuration, on page 187 table.
Before you begin
Access the phone administration web page. See Access the Phone Web Interface, on page 104.
Procedure
Select Info > Status > TR-069 Status.
You can view status of TR-069 parameters in Parameters for TR-069 Configuration, on page 187 table.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
186
Cisco IP Phone Configuration
View TR-069 Status

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English