Macro ExpansionMacro Name
Request target file path.PATH
Result message of resync or upgrade attempt.ERR
The contents of the Line n UserID configuration parameter.UIDn
If unit is customized, value=1, otherwise 0.
Customization status viewable on Web UI Info page.
Note
ISCUST
Name associated with first connected, ringing, or inbound call.INCOMINGNAME
Phone number of first connected, ringing, or inbound call. If there are multiple calls,
the data associated with the first call found is provided.
REMOTENUMBER
The contents of the Line N Display Name configuration parameter.DISPLAYNAMEn
The contents of the Line N auth ID configuration parameter.AUTHIDn
Shared Lines
A shared line is a directory number that appears on more than one phone. You can create a shared line by
assigning the same directory number to various phones.
Incoming calls display on all phones that share a line, and anyone can answer the call. Only one call remains
active at a time on a phone.
Call information displays on all phones that are sharing a line. If somebody turns on the privacy feature, you
do not see the outbound calls made from the phone. However, you see inbound calls to the shared line.
All phones with a shared line ring when a call is made to the line. If you place the shared call on hold, anyone
can resume the call by pressing the corresponding line key from a phone that shares the line. You can also
press the Select button if the Resume icon is displayed.
The following shared line features are supported:
• Line Seizure
• Public Hold
• Private Hold
• Silent Barge (only through enabled programmable softkey)
The following features are supported as for a private line
• Transfer
• Conference
• Call Park / Call Retrieve
• Call Pickup
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
170
Cisco IP Phone Configuration
Shared Lines
To Next Page
Loading...
Need help?
General