Cisco PenTeleData 8800 Series Guide

If the phone has an active call, you can not save the changes.
Wi-Fi Profile (n)
The following table defines the function and usage of each parameter in the Wi-Fi Profile(n) section under
the System tab in the phone web page. It also defines the syntax of the string that is added in the phone
configuration file with XML(cfg.xml) code to configure a parameter.
Table 69: Wi-Fi Profile Parameters Table
DescriptionParameter
Allows you to enter a name for the SSID that will
display on the phone. Multiple profiles can have the
same network name with different security mode.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Network_Name_1_ ua="rw">cisco</Network_Name_1_>
• In the phone web page:, enter a name for the
SSID.
Network Name
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
333
Cisco IP Phone Installation
Wi-Fi Profile (n)

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English