Cisco PenTeleData 8800 Series Guide

DescriptionParameter
Allows you to select the authentication method that
is used to secure access to the Wi-Fi network.
Depending on the method you choose, a password,
passphrase, or key field appears so that you can
provide the credentials that are required to join this
Wi-Fi network.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Security_Mode_1_ ua="rw">Auto</Security_Mode_1_><!--
available options:
Auto|EAP-FAST|PEAP-GTC|PEAP-MSCHAPV2|PSK|WEP|None
-->
• In the phone web page:, select one of the
methods.
• Auto
• EAP-FAST
• PEAP-GTC
• PEAP-MSCHAPV2
• PSK
• WEP
• None
Default: None
Security Mode
Allows you to enter a user ID for the network profile.
This field is available when you set the security mode
to Auto, EAP-FAST, PEAP-GTC, or PEAP
(MSCHAPV2). This is a mandatory field and it allows
maximum length of 32 alphanumeric characters.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Wi-Fi_User_ID_1_ ua="rw"></Wi-Fi_User_ID_1_>
• In the phone web page:, enter a user ID for the
network profile.
Wi-Fi User ID
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
334
Cisco IP Phone Installation
Wi-Fi Profile (n)

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English