Cisco PenTeleData 8800 Series Guide

DescriptionParameter
BroadSoft User ID of the phone user; for example,
johndoe@xdp.broadsoft.com.
Enter SIP Auth ID when you select Login Credentials
or SIP Credentials for XSI authentication type.
When you choose SIP Auth ID as SIP Credentials,
you must enter Login User ID. Without Login User
ID, the BroadSoft directory will not appear under the
phone Directory list.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Login_User_ID
ua="na">username</Login_User_ID>
• In the phone web interface, enter the username
used to authenticate the access to the XSI server.
Default: Empty
Login User ID
Alphanumeric password associated with the User ID.
Enter login password, when you select Login
Credentials for XSI authentication type.
Default: Empty
Login Password
Enables BroadSoft directory for the phone user. Select
Yes to enable the directory and select No to disable
it.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Directory_Enable
ua="na">Yes</Directory_Enable>
• In the phone web interface, set this field to Yes
to enable the BroadSoft directory.
Option: Yes and No
Default: No
Directory Enable
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
205
Cisco IP Phone Configuration
Parameters for BroadWorks XSI Call Logs on a Line

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English